Useful Tips
Recommendations for handling machine, washing, drying, etc.
We recommend that whenever possible, back flushing with a maximum load. Thus able to considerably reduce the consumption of water and energy.
When you have to wash heavily soiled or spongy as towels, we advise you to reduce the load.
It is preferable that each load to mix items of different sizes, which provides a more uniform distribution thereof inside the drum during the centrifuging. Thus have quieter operation.
Your clothes thank you and also your machine!
Meaning of the symbols
Wash and dry in a machine with normal mechanical action and normal spin, with the indicated temperatures
Wash and dry in a machine with normal mechanical action and normal spin, with the indicated temperatures
Handwash 30 ° C maximum temperature
No handwash
Can use bleach
Do not use bleach.
Iron at a low temperature: maximum 110ºC
Iron at an average temperature: maximum 150ºC
Iron at an elevated temperature: maximum 200ºC
Do not iron.
You can use the dryer
You can not use the dryer
Dry cleaning with various types of solvents
Do not dry clean
Advices on Types of Water Heaters
There are three types of heaters, each with different operating ways. The difference lies in the way it makes the air inlet for the combustion and evacuation of combustion gases.
In the atmospheric and ventilated, air is captured directly from the room where the appliance is located.
In the case of atmospheric boilers, evacuation is performed in a natural way, through a suitable conduit, which expels exhaust.
In models ventilated, evacuation is facilitated by a ventilator placed outside the apparatus.
Recommended product:
ANTICALCARIO LIG.TORNEIRA SV0104020
Atmospheric
- Before choosing a water heater for your home, consider the size of the installation location (but not in the bathroom). The heat losses in the pipes are smaller and the water heats faster.
Ventilated
- To install a heater atmospheric correctly (for proper evacuation of gases) requires a vertical pipeline with at least 20 cm. Only then can the curve followed by another riser (at least 30 tilt never horizontal).
Ponds
- These restrictions prevent construction, often placing the atmospheric models. Therefore, the ventilation are increasingly common. However, these are larger in height, which can hinder the task.
Electric water accumulator or heater
The boiler is a water heating system which comprises a reservoir adapted to put the water.
The capacity of this reservoir can typically vary between 15 liters and 300 liters.
The reservoir is covered by an outer insulating layer, which helps not to lose heat.
Contains two outlets, one outlet duct for hot water and one inlet duct which is cold water, which is installed the security group that aims to release the excess internal pressure.
Inside the tank there is a resistance and a thermostat. The thermostat turns on or off the resistance as the temperature we want. It is essential that the thermostat is set to a temperature close to 60 ° C. A temperature below 55 ° C, development aid of bacteria.
On the other hand, if the temperature is too high lime deposits, corrosion, heat losses and risks of burns increases.
If the inside tank is made of enamelled sheet and does not have a magnesium anode, (*) it is advisable to install one. This type of device protects the interior of the boiler from corrosion and must be changed when it is already widely used. Generally when the color is too dark or thickness is too thin it should be replaced by a new one.
Recomended Product:
* See here: Anodo de Mágnesio 260X26mm (75l a 100l) Codig. 230183001
Periodic Maintenance
Should proceed to opening the safety valve from time to time.
It is advisable to open it once a month. Just a few seconds to prevent clogging of the safety valve with lime originating yield losses.
When there is an excess of lime deposited on resistance, the heating system is low and consumption of electricity is in turn greater. There is another way to reduce the formation of lime scale, which is not let warm water above 60 ° C.
It is also convenient in a way that there is a regular cleaning to promote the elimination of lime scale (*), even so, if it is accumulating.
Such a task should be done by professionals because it is necessary to open and disassemble the bottom of the heater.
Recomended Product:
Practical Advice about Refrigerators
If you leave your house for vacation or other reason for a long period of time, unplug your refrigerator. Make sure the fridge works independently from the freezer. This allows you to just turn off the refrigerator or the entire apparatus (applies only to combined).
Take the food out and dry the inside of the refrigerator.
Leave the door open to prevent mold or odors.
Take the same precautions in case of a long power failure or defective equipment.
Recomended Products:
Spay Spay Defrosting Frig. CLE000011
Spay Spay Clean Frig. Microwaves CLE000010
Liquid Cleaning and Protection Stainless Steel SV0012500 ( Only Finished in stainless steel )
Practical Advice on Dishwashers
It is advisable that every six months, fill the tank of your machine detergent with a special product cleans machines, select the economic program and let the dishwasher perform the complete cycle.
Before introducing the dishes in the machine, we recommend that you first go through the water to remove food debris. This way will best wash results and better performance of your machine.
Recomended Products:
Prod. Clean Laundry. Clothes Washery (Elem. Calc.)) CLE000008
Dishwasher freshner CLE000009
Dishwasher cleaner (Deseng. Elem. Calc.) YY52X5145
Dishwasher freshner CLE000009
Liquid Cleaning and Protection Stainless Steel. SV0012500 ( Only Finished in stainless steel )
Descaling LIG.Water Tap SV0104020
Advice on cleaning plates
Prior to cleaning your plate, make sure it is cold. Wiping the hot plate, you risk scratching it, plus you can burn.
Do not use abrasives. It is preferable to use specific products.
We recommend that you clean the surface with a cloth, since the sponges absorb much product and leave stains.
To avoid stains on your plate, the containers must be thoroughly dried.
Hard water stains on the plate leaves.
Cream Clean Vitro and Induction Plates CLE000001
Kitt Clean Vitro and Induction Plates CLE000002
Vitro Plate Protector CLE000003
Wipes to Clean Vitro Plate CLE000004
Cleaning and protection cream for Inox Aluminium CLE000006
Spatula to Clean Ind. Plates CLE000018
Tips on Cleaning Ovens
Where may, it is preferable to clean the hot oven. The fat is much more easily.
Where the cold clean, use a foam cleaner furnaces. Leave to act during one hour to allow the fat dissolves better, and once cleaned, let the door half open to dry.
You can also opt for a natural cleaning method that involves placing a tray with water and lemon and boil for 10 minutes. The degreasing power of lemon will effect.
Product Clean Ovens (YY76S5140) CLE000007
Liquid Cleaning and Protection Stainless Steel. SV0012500 (Only Finished in stainless steel)
S.A.T. Dealers
© 2019 Powered by Intouchbiz.
